Model TPW-2200
Commercial Pressure Washer
This Titan industrial Commercial Pressure Washer, Model TPW-2200, is a gasoline operated device that
converts a water source flow into extremely high pressure. The unit is portable and mobile. The gasoline
engine makes it possible to use the unit in remote areas that are void of electrical power if needed.
Soaps or cleaning solvents can be mixed into the pressurized stream to make the cleaning even more
powerful.
Quick Reference Information:
|
Fuel
|
Type
|
Unleaded gasoline with a pump
octane rating of 86 or higher
|
|
Engine Oil
|
Type
|
SAE 10W-30, API SJ or SL,
for general use
|
|
Spark Plug
|
Type
|
NGK: BPR6ES,
DENSO: W20EPR-U
|
|
Gap
|
0.028-0.031 in (0.70-0.80 mm)
|
|
Carburetor
|
Idle speed
|
1,400 +/- 150 rpm
|
|
Maintenance
|
Before each use
|
Check engine oil level.
Check transmission oil level
if applicable.
Check air filter.
|
|
First 20 hours
|
Change engine oil.
Change transmission oil
if applicable.
|
|
Subsequent
|
Refer to the
maintenance schedule.
|
Pump:
|
PSI
|
Gallons Per Minute
|
Soap Pickup
|
|
2200 PSI @ 3500 RPM
|
2.5 Gallons/Minute @ 30 # Inlet
|
Suction-Side
|
Download the manual for this pressure washer.
Engine: |
| Engine Type: | Titan |
| Horse Power: | 6.0HP |
| RPM: | 3500 RPM |
| Fuel: | Low Octane Gas |
| Fuel Capacity: | 2.3 Gallons |
| Ignition System: | Pull Start |
| Hours of Operation @ Half Load: | 4.3 Hours |
| Dimensions: | L-36" W-21 1/2" H-25" |
| Net Weight: | 76 lbs |
| Warranty: | 1 Year |
|
|
|
|
 Print Page |
